home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The CICA Windows Explosion!
/
The CICA Windows Explosion! - Disc 2.iso
/
nt
/
ntkb.zip
/
NTKB.EXE
/
Q106
/
2
/
04.TXT
< prev
next >
Wrap
Text File
|
1993-12-13
|
3KB
|
90 lines
DOCUMENT:Q106204 10-DEC-1993 [W_NT]
TITLE :Err Msg: Error Starting Remote Access Service on <Server_Name>
PRODUCT :Windows NT
PROD/VER:3.10
OPER/SYS:WINDOWS
KEYWORDS:err msg
-----------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows NT operating system version 3.1
- Microsoft Windows NT Advanced Server version 3.1
-----------------------------------------------------------------
SYMPTOMS
========
Remote Access Service (RAS) Administrator issues the following error
message if your RAS configuration specifies Dial Out Only in the
Network application in Control Panel:
Error starting Remote Access Service on <Server_Name>. Check the
Event log on <Server_Name> for details.
Error 1066: The service has returned a service-specific error code.
WORKAROUND
==========
To correct the setup so you will no longer receive the above error
message, do the following:
1. In the Control Panel window, choose the Network icon.
2. In the Installed Network Software box, select Remote Access
Service.
3. In the Remote Access Setup dialog box, choose Configure, and then
choose Configure again.
4. In the Port Usage box, make sure either the Receive Calls Only or
the Dial Out And Receive Calls option box is selected.
5. Choose OK, shut down Windows NT, and restart.
MORE INFORMATION
================
Steps to Reproduce Behavior
---------------------------
1. In the Control Panel window, choose the Network icon.
2. In the Installed Network Software box, select Remote Access
Service.
3. In the Remote Access Setup dialog box, choose Configure, and then
choose Configure again.
4. In the Port Usage box, select the Dial Out Only option button.
5. Choose OK, shut down Windows NT, and then restart.
6. After logging back on to Windows NT, double-click the RAS
Administrator utility.
7. From the Server menu, select Start Remote Access Service, select
your server, and then choose OK.
The above error message will appear.
Additional reference words: 3.10 1066 ras
KBCategory:
KBSubCategory: ntrmt
=============================================================================
THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.
Copyright Microsoft Corporation 1993.